Check Before Engine Is Started
Check Before Engine is Started1. CHECK A/T CHECK INDICATOR LAMP
1. Park vehicle on level surface.
2. Move selector lever to "P" position.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON.
Does A/T CHECK indicator lamp light up for about 2 seconds?
YES >> GO TO 2.
NO >> Stop the road test and go to AT-194, "A/T CHECK Indicator Lamp Does Not Come On". A/T Check Indicator Lamp Does Not Come On
2. CHECK A/T CHECK INDICATOR LAMP
Does A/T CHECK indicator lamp flash for about 8 seconds?
YES >> For TCM fail-safe mode, perform self-diagnostics and record all NG items on the AT-47, "DIAGNOSTIC WORKSHEET". Introduction Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", AT-104, "Diagnostic Procedure without CONSULT-II". and
NO >>
1. Turn ignition switch OFF.
2. Perform self-diagnostics and record all NG items on the AT-47, "DIAGNOSTIC WORKSHEET". Introduction Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", AT-104, "Diagnostic Procedure without CONSULT-II". and
3. Go to AT-57, "Check at Idle". Check at Idle