Data Monitor Mode

DATA MONITOR MODE

Operation Procedure
1. Perform CONSULT-II SETTING PROCEDURE. Refer to TF-22, CONSULT-II SETTING PROCEDURE. CONSULT-II Setting Procedure
2. Touch DATA MONITOR.
3. Select from SELECT MONITOR ITEM, screen of data monitor mode is displayed. NOTE: When malfunction is detected, CONSULT-II performs REAL-TIME DIAGNOSIS. Also, any malfunction detected while in this mode will be displayed at real time.





Display Item List

ACTIVE TEST MODE
Description
Use this mode to determine and identify the details of a malfunction based on self-diagnostic results or data monitor. AWD control unit gives drive signal to actuator with receiving command from CONSULT-II to check operation of actuator.





Test Item

CAUTION: Do not continuously energize for a long time.

AWD CONTROL UNIT PART NUMBER
Ignore the AWD control unit part number displayed in the ECU PART NUMBER. Refer to parts catalog to order the AWD control unit.