A/T Indicator Circuit

A/T INDICATOR CIRCUIT

Description
TCM sends the switch signals to combination meters. By CAN communication line. Then manual mode switch position is indicated on the A/T indicator.





CONSULT-II Reference Value

Diagnostic Procedure
1. CHECK INPUT SIGNALS

With CONSULT-II





1. Start engine.
2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II and read out the value of "GEAR".
3. Drive vehicle in the manual mode, and confirm that the actual gear position and the meter's indication of the position mutually coincide when the selector lever is shifted to the "+ (up)" or (down)" side (1st -> 5th gear).
OK or NG
OK >> INSPECTION END
NG >> Check the following.





A/T INDICATOR SYMPTOM CHART