With Manufacturer's Scan Tool (CONSULT-II)

1. Turn ignition switch "OFF".




2. Connect "CONSULT-II" and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch "ON".
4. Touch "START (NISSAN BASED VHCL)".




5. Touch "BCM".
If "BCM" is not indicated, go to GI-40 , "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




6. Touch "REAR DEFOGGER".




7. Select diagnosis mode,"DATA MONITOR" and "ACTIVE TEST" are available.