Transmission Temperature Sensor/Switch: Service and Repair
A/T FLUID TEMPERATURE SENSOR 2 REMOVAL AND INSTALLATIONRemoval
1. Disconnect negative battery terminal
2. Remove oil pan and oil pan gasket.
3. Disconnect A/T fluid temperature sensor 2 connector.
CAUTION: Be careful not to damage connector.
4. Straighten terminal clip to free A/T fluid temperature sensor 2 harness.
5. Remove A/T fluid temperature sensor 2 with bracket from control valve with TCM.
6. Remove bracket from A/T fluid temperature sensor 2.
Installation
CAUTION: After completing installation, check for A/T fluid leakage and fluid level.
1. Install A/T fluid temperature sensor 2 to bracket.
2. Install A/T fluid temperature sensor 2 (with bracket) in control valve with TCM. Tighten A/T fluid temperature sensor 2 mounting bolt to the specified torque.
CAUTION: Adjust bolt hole of bracket to bolt hole of control valve with TCM.
3. Connect A/T fluid temperature sensor 2 connector.
4. Securely fasten A/T temperature sensor 2 harness with terminal clip.
5. Install oil pan to transmission case
6. Connect the negative battery terminal