Engine Controls - MIL ON/DTC's P1273/P1283/P1274/P1284

Classification:
EC04-026

Reference:
ITB04-059

Date:
October 29, 2004

MUST CLEAR SELF-LEARNING AFTER REPAIRING DTC
P1273/P1283 OR P1274/P1284 / AIR FUEL LEAN OR RICH SHIFT

APPLIED VEHICLES:
All Infiniti's with DTC's P1273 / P1274 / P1283 / P1284

IF YOU CONFIRM:
A MIL ON" with any of the following DTC(s) stored:

^ P1273 / P1283 (A/F Sensor Bank-1 / 2-Lean Monitor)

^ P1274 / P1284 (A/F Sensor Bank-1 / 2-Rich Monitor)

ACTIONS:

1. Repair the vehicle as necessary.

^ Refer to ASIST for diagnostic and repair information.

2. Clear the engine ECU Self-Learning.

IMPORTANT:
If Self-Learning Is Not Cleared:

^ The DTC may be stored again; even if no malfunction exists.

^ This could result in the customer returning with the same incident ("come-back" repair).

CLAIMS INFORMATION

The procedure to clear ECU Self-Learning is part of the DTC repair and should not be claimed as a separate repair item.

IMPORTANT:
The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully completing this repair.

SERVICE PROCEDURE

1. Repair the source of the lean condition (P1273/P1283) or rich condition (P1274/P1284).

^ Check ASIST for any specific incident bulletins that may apply to your vehicle.

^ As necessary follow Service Manual (ESM) diagnostic and repair information.








2. Clear the engine Self-Learning. Use CONSULT-II as shown.





Disclaimer