CONSULT-II Basic Operation

CONSULT-II Function (REARVIEW CAMERA)

CONSULT-II BASIC OPERATION

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.




1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector, then turn ignition switch ON.




2. Touch "START (NISSAN BASED VHCL)".




3. Touch "REARVIEW CAMERA" on "SELECT SYSTEM" screen. If "BCM" is not indicated, go to BCS-11, "CONSULT-II INSPECTION PROCEDURE". With Manufacturer's Scan Tool (CONSULT-II)




4. Select "WORK SUPPORT", "DATA MONITOR" or "ECU PART NUMBER".