Clearing Trouble Codes

Self-Diagnostic Erasing Method
1. Stop the vehicle and turn the ignition switch OFF.
2. Turn ignition switch ON and start self-diagnosis.
3. During self-diagnosis mode, press CANCEL switch 5 times, and DISTANCE switch 5 times within a 10 seconds time period.

CAUTION:
- Switch inputs must be received within a 10 seconds time period.
- When operation is not completed within 10 seconds start again from step 1.

4. DTC 55 will be shown.

CAUTION: DTC of an existing malfunction will not be erased.

5. Turn ignition switch OFF to exit the diagnosis.
6. Perform ICC system running test (drive vehicle with ICC system ON), and make sure that ICC system warning lamp (orange) does not illuminate.