Rod Bearing Cap

Rod Bearing Cap





Tighten connecting rod bolts using Tool.
Tool number: KV10112100 (BT-8653-A
Connecting rod bolts
Step 1 19.6 Nm (1.5 kg-m, 11 ft. lbs.)
Step 2 90° clockwise
After tightening bolts, make sure the crankshaft rotates smoothly.
Check connecting rod side clearance. Refer to "CONNECTING ROD SIDE CLEARANCE"

CONNECTING ROD BOLT DIAMETER
^ Measure diameter "d" at position shown.





^ When "d" is out of specifications (when it becomes thinner), replace bolt with a new one.
Limit: 7.75 mm (0.3051 inches) or less.