Removal and Installation
Removal and InstallationREMOVAL
1. Disconnect the negative battery terminal and positive battery terminal.
CAUTION: Remove the negative battery terminal first.
2. Remove the battery cover.
3. Remove the battery clamp bolt and battery clamp.
4. Remove the battery.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: When installing, install the positive battery terminal first.
Battery clamp bolt : 3.5 Nm (0.36 kg-m, 31 in-lb)
Battery terminal nut : 3.5 Nm (0.36 kg-m, 31 in-lb)