Wheels - Wheel Center Cap Installation Precaution

Classification:
WT05-001

Reference:
ITB05-030

Date:
June 9, 2005

2004-2005 QX56; CENTER WHEEL COVER INSTALLATION

APPLIED VEHICLE:
2004 - 2005 QX56 (JA6O)

SERVICE INFORMATION





When installing the center wheel covers (during PDI or after other wheel and tire service) make sure to align the Infiniti emblem on the cover with the valve stem on the wheel as shown in Figure 1.

CAUTION:
When installing the covers to avoid damage to the clips that hold the wheel covers in place it is important to:

1. Align the positioning legs on the cover with the lug nut holes on the wheel and

2. Hold the cover parallel to the wheel (straight up and down) making sure all 6 retaining legs are evenly touching "flush" against the wheel.

3. Then use only the heel of your hand to snap the cover in place.

Do Not use a hammer/mallet to install the covers.





Disclaimer