Diagnostic Strategies
Work Flow1. Check the symptom and customer's requests.
2. Understand the system description. Refer to "System Description".
3. Perform the preliminary check, refer to SE-36, "Preliminary Check". Initial Inspection
4. Perform the CAN communication inspection using CONSULT-II, refer to SE-39, "CONSULT-II Function (AUTO DRIVE POS.)". Description of On-Board Diagnostics
5. Perform the self-diagnosis. Refer to SE-42, "Check CAN Communication System". Check CAN Communication System
6. Repair or replace depending on the self-diagnostic results.
7. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart".
8. Does the automatic drive positioner system operate normally?
If it is normal, GO TO 8.
If it is not normal, GO TO 3.
9. INSPECTION END