Rear Combination Lamp
Removal and InstallationREMOVAL
Rear Fender Side
1. Remove bumper side cover A.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting bolts.
4. Pull rear combination lamp toward side of the vehicle and remove from the vehicle.
Trunk Lid Side
1. Remove back door finisher.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting nuts.
4. Remove rear combination lamp from back door.
5. Remove seal packing from back door.
INSTALLATION
Installation is the reverse order of removal.
- Installation a new seal packing to the rear combination lamp.
CAUTION: Seal packing cannot be reused.
Rear combination lamp (trunk lid side) mounting nut : 5.5 N.m (0.56 kg-m,49 in-lb)
ear combination lamp (rear fender side) mounting nut : 3.2 N.m (0.33 kg-m,28 in-lb)