Active Test

ACTIVE TEST MODE

NOTE: Before performing the self-diagnosis, be sure to register the ID, or else the actual malfunction location may be different from that displayed on CONSULT-II.

Operation Procedure





1. Touch necessary test item.
2. The Active Test screen will be displayed, so perform the following test.

Test Item
^ Flasher
^ Horn
^ Warning lamp
^ ID regist warning
^ Flat tire warning

Flasher





Touch "LH" and "RH" on the display, and then check to make sure that each turn signal lamp turns on.

Horn





Touch "LH" and "RH" on the display, and then check to make sure that the horn sounds.

Warning Lamp





Touch "LH" and "RH" on the display, and then check to make sure that the warning lamp turns on.

ID Regist Warning





Touch "LH" and "RH" on the display, and then check to make sure that the buzzer sounds or the warning lamp turns on.

Flat Tire Warning





Touch "LH" and "RH" on the display, and then check to make sure that the buzzer sounds or the warning lamp turns on.