Cruise Test - Part 2

Cruise Test - Part 2
1. CHECK STARTING FROM D1
1. Move selector lever into D position.
2. Accelerate at half throttle.

With CONSULT-II
Read the gear position.
Does it start from D1?
YES >> GO TO 2.
NO >> Enter a check mark at AT-201, Vehicle Cannot Be Started From D1 on the AT-48, DIAGNOSTIC WORKSHEET, then continue the road test. Diagnostic Worksheet
2. CHECK SHIFT-UP D1 -> D2
Press the accelerator pedal down all the way and check whether or not the A/T shifts up (D1 -> D2) at the correct speed.

With CONSULT-II
Read the gear position, throttle position and vehicle speed. Refer to AT-95, "DATA MONITOR MODE". Data Monitor Mode
Does the A/T shift-up D1 -> D2 at the correct speed?
YES >> GO TO 3.
NO >> Enter a check mark at AT-204, A/T Does Not Shift: D1 -> D2 on the AT-48, DIAGNOSTIC WORKSHEET, then continue the road test. A/T Does Not Shift: D1 -> D2
Diagnostic Worksheet
3. CHECK SHIFT-UP D2 -> D3
Press the accelerator pedal down all the way and check whether or not the A/T shifts up (D2 -> D3) at the correct speed.

With CONSULT-II
Read the gear position, throttle position and vehicle speed.
Does the A/T shift-up D2 -> D3 at the correct speed?
YES >> GO TO 4.
NO >> Enter a check mark at AT-206, A/T Does Not Shift: D2 -> D3 on the AT-48, DIAGNOSTIC WORKSHEET, then continue the road test. Diagnostic Worksheet
4. CHECK SHIFT-UP D3 -> D4 AND ENGINE BRAKE
When the A/T changes speed D3 -> D4, return the accelerator pedal.

With CONSULT-II
Read the gear position.
Does the A/T shift-up D3 -> D4 and apply the engine brake?
YES >>
1. Stop the vehicle.
2. Go to AT-61, Cruise Test - Part 3". Cruise Test - Part 3
NO >> Enter a check mark at AT-208, A/T Does Not Shift: D3 -> D4 on the AT-48, DIAGNOSTIC WORKSHEET, then continue the road test. Go to AT-61, Cruise Test - Part 3". Cruise Test - Part 3