Oil Pan, Engine
Oil Pan2WD Models:
Image Symbols:
Oil pan (upper)
Tighten mounting bolts in numerical order as shown in the figure.
There are two types of mounting bolts. Refer to the following for locating bolts.
M8 x 100 mm (3.94 inch): 5, 7, 8, 11
M8 x 25 mm (0.98 inch): Except the above
Oil pan (lower)
Tighten mounting bolts in numerical order as shown in the figure.
Install oil pan drain plug. Refer to the figure of components for installation direction of drain plug washer. Refer to EM-30, Components (2WD Models).
Install in the reverse order of removal after this step.