Timing Components: Specifications

Timing Chain Tensioner

Image Symbols:

Crankshaft Pulley
Tighten crankshaft pulley bolt.
Torque 93.1 Nm (9.5 kg-m, 69 ft. lbs.)
Put a paint mark on crankshaft pulley aligning with angle mark on crankshaft pulley bolt.





Further tighten by 90 degrees. (Angle tightening) Check the tightening angle by referencing to the notches. The angle between two notches is 90°.
Rotate crankshaft pulley in normal direction (clockwise when viewed from engine front) to confirm it turns smoothly.
Install in the reverse order of removal after this step.