In P Position, Vehicle Moves When Pushed

In P Position, Vehicle Moves When Pushed

Image Symbols:

SYMPTOM: Even though the selector lever is set in the P position, the parking mechanism is not actuated, allowing the vehicle to be moved when it is pushed.

DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-92, SELF-DIAGNOSTIC RESULT MODE. Self-Diagnostic Result Mode
Refer to AT-102, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". TCM Self-Diagnostic Procedure (No Tools)
Do the self-diagnostic results indicate PNP switch?
YES >> Check the malfunctioning system.
NO >> GO TO 2.
2. CHECK CONTROL LINKAGE





Check the control linkage.
OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage.
3. CHECK PARKING COMPONENTS
Check parking components. Refer to AT-251, Parking Components (2WD Models Only) (2WD models).
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.
4. CHECK A/T FLUID CONDITION
1. Remove oil pan.





2. Check A/T fluid condition.
OK or NG
OK >> INSPECTION END
NG >> Check the malfunction items. If any items are damaged, repair or replace damaged parts.