Memory Positioning Systems: Description and Operation

AUTOMATIC DRIVE POSITIONER

Manual Operation
The driving position [front seat LH position, steering wheel, pedal position (accelerator, brake) and door mirror position] can be adjusted with the power seat switch LH, pedal adjusting switch, door mirror remote control switch or ADP steering switch.

NOTE:
- The door mirrors can be manually operated with the ignition switch turned to ACC or ON.
- Adjustable pedals can only operate when A/T selector lever is in P position (except when ignition switch turned to OFF).
- If A/T device (park position switch) error is detected, manual adjustable pedal operation cannot be performed when ignition switch turns ON.




Automatic Operation

System Description
- The system automatically moves the driver seat and steering wheel to facilitate entry/exit to/from the vehicle. The driver seat control unit can also store the optimum driving positions (driver seat, steering wheel, pedal position and door mirror position) for 2 people. One-touch operation allows changing between driving positions.
- The settings (ON/OFF) of the automatic sliding seat (Entry/Exiting operation) at entry/exit can be changed as desired, using the display unit in the center of the instrument panel. The set content is transmitted by CAN communication, from display control unit to driver seat control unit.
- Using CONSULT-II, the seat slide amount at entry/exit setting can be changed.

Fail-Safe Mode:

FAIL-SAFE MODE

CANCEL OF FAIL-SAFE MODE
The mode is cancelled when the A/T selector lever is shifted to P position from any other position.




MEMORY STORING AND KEYFOB INTERLOCK STORING
- Store the 2 driving positions and shifts to the stored driving position with the memory switch.
- Key fob interlock function is set simultaneously with setting driving position memory. It can set driving position to memory position.

NOTE:
- If another key fob interlock function setting is performed by same key, the newly registered setting is valid.
- If a new memory string is performed to memory switch that already set key fob interlock function, key fob interlock function setting is maintained.
- If the key fob has not been previously programmed to the vehicle, key fob interlock function cannot set.

MEMORY OPERATION
Selecting the memorized position.
1. Within 45 seconds of opening front door LH press the desired seat memory switch for at least 1 second, or turn ignition switch ON and press the desired seat memory switch for at least 1 second.
2. The front seat LH, door mirrors, accelerator pedal and brake pedal will move to their set memory positions. During adjustments, indicator LED flashes, then illuminates for 5 seconds.






NOTE: The front seat LH position and pedal adjustment functions (see the table) operate simultaneously in the order of priority.




ENTRY OPERATION
When the front seat LH is in the exiting position, the following operation moves the seat to the previous position before the exiting operation.




EXITING OPERATION
At Entry/Exiting, the front seat LH is automatically moved to the exiting position.




KEYFOB INTERLOCK OPERATION
- The system performs memory operation, exiting operation and return operation by pressing key fob unlock button.

NOTE:
- If Entry/Exiting operation is cancelled, the system performs memory operation only.
- If ignition switch turns ON in the middle of memory operation, the system does not perform exiting operation after memory operation.
- If ignition switch turns ON in the middle of exiting operation, entry operation starts at that time.

CAN Communication System Description
Refer to LAN-26, "Information Bus". Description and Operation