Headlamp: Adjustments

Aiming Adjustment
For details, refer to the regulations in your area.

NOTE: If vehicle front body has been repaired and /or the headlamp assembly has been replaced, check headlamp aiming.

HEADLAMP AIMING

NOTE:
- Before performing aiming adjustment, check the following:
- Confirm headlamp aiming switch is set to "0" (zero) position.
- Ensure all tires are inflated to correct pressure.
- Place vehicle and screen on level surface.
- Ensure there is no load in vehicle other than the driver (or equivalent weight placed in driver's position). Coolant and engine oil filled to correct level, and fuel tank full.
- Confirm spare tire, jack and tools are properly stowed.
- Aim each headlamp individually and ensure other headlamp beam pattern is blocked from screen.
- Use adjusting screw to perform aiming adjustment




- Basic illuminating area for adjustment should be within the range shown on the aiming chart. Adjust headlamps accordingly.