DTC Work Support Mode

DTC WORK SUPPORT MODE
Operation Procedure
1. Perform "CONSULT-II SETTING PROCEDURE". Refer to AT-86, "CONSULT-II SETTING PROCEDURE". CONSULT-II Setting Procedure





2. Touch DTC WORK SUPPORT.





3. Touch select item menu.





4. Touch START.





5. Perform driving test according to DTC CONFIRMATION PROCEDURE in TROUBLE DIAGNOSIS FOR DTC.





^ When testing conditions are satisfied, CONSULT-II screen changes from OUT OF CONDITION to TESTING.





6. Stop vehicle.





^ If NG appears on the screen, malfunction may exist. Go to Diagnostic Procedure.





7. Perform test drive to check gear shift feeling in accordance with instructions displayed.
8. Touch YES or NO.
9. CONSULT-II procedure is ended.





^ If NG appears on the screen, a malfunction may exist. Go to Diagnostic Procedure.

Display Items List: