Information on Parts 1 to 4

There are 4 parts to this service procedure. They must be done in order.

Part 1: Make sure DTC C1179 is or can be stored in ABS self diagnosis.

^ Go to part 1 for this part of the service procedure.

Part 2: Download special VDC Reprogramming Data from ASIST onto your standard 8 MB (orange) Reprogramming Card.

^ Go to part 2 for this part of the service procedure.

Part 3: Reprogram the VDC Control Unit with the 8 MB (orange) Reprogramming Card (that now contains the downloaded VDC reprogramming data from ASIST).

^ Go to part 3 for this part of the service procedure.

Part 4: Re-program the 8 MB (orange) Reprogramming Card back to its original format so it can be used for standard ECU reprogramming.

^ Refer to part 4 for this part of the service procedure.

NOTE:
These procedures should be performed in order by an OBD-II certified Technician.