Side Window Glass

SIDE WINDOW GLASS




Removal and Installation

REMOVAL
1. Remove the rear lower and upper finisher.
2. Disconnect the rear side window motor harness.
3. Remove the rear side window motor mounting bolts.
4. Remove the rear side window front mounting nuts.

INSTALLATION
1. Install the glass from outside to insure that it is even with the top and bottom of the opening. Tighten rear side window front mounting nuts to the specified torque.

Glass mounting nuts : 4.2 N.m (0.43 kg-m, 37 in-lb)

2. Install rear side window motor mounting bolts. Tighten rear side window latch mounting bolts to the specified torque.

Motor mounting bolts : 5.6 N.m (0.57 kg-m, 49 in-lb)

3. Connect the rear side window motor harness.
4. Install rear pillar upper and lower finisher.