Camshaft Bearing Cap

Camshaft Bearing Cap





Tighten camshaft bracket bolts in the following steps, in numerical order as shown.
Tighten No. 7 to 10 in numerical order as shown 1.96 Nm (0.20 kg-m, 1 ft. lbs.)
Tighten No. 1 to 6 in numerical order as shown 1.96 Nm (0.20 kg-m, 1 ft. lbs.)
Tighten No. 1 to 10 in numerical order as shown 5.88 Nm (0.60 kg-m, 4 ft. lbs.)
Tighten No. 1 to 10 in numerical order as shown 10.4 Nm (1.1 kg-m, 8 ft. lbs.)

CAUTION: After tightening mounting bolts of camshaft brackets (No. 1), be sure to wipe off excessive liquid gasket from the parts list.
Mating surface of rocker cover
Mating surface of rear timing chain case