Pinout Values and Diagnostic Parameters

Terminals And Reference Values For BCM (Part 1):

Terminals And Reference Values For BCM (Part 2):

Terminals And Reference Values For BCM (Part 3):

Terminals And Reference Values For BCM (Part 4):

Terminals And Reference Values For BCM (Part 5):

Terminals and Reference Values for BCM

CAUTION:
- Check combination switch system terminal waveform under the loaded condition with lighting switch, turn signal and wiper switch OFF not to be fluctuated by overloaded.
- Turn wiper dial position to 4 except when checking waveform or voltage of wiper dial position. Wiper dial position can be confirmed on CONSULT-II. Refer to LT-117, "DATA MONITOR". Data Monitor