Tightening Torques & Sequences

Intake Manifold





^ If stud bolts were removed, install them and tighten to the specified torque below.
Torque 10.8 Nm (1.1 kg-m, 8 ft. lbs.)





^ Tighten all mounting bolts and nuts to the specified torque in two or more steps in numerical order shown in the figure.
1st step 7.4 Nm (0.75 kg-m, 5 ft. lbs.)
2nd step and after 29.0 Nm (3.0 kg-m, 21 ft. lbs.)