Cruise Test - Part 3
Cruise Test - Part 31. MANUAL MODE FUNCTION
Move to manual mode from "D" position.
Does it switch to manual mode?
YES >> GO TO 2.
NO >> Continue road test and add check mark to AT-219, "Cannot Be Changed to Manual Mode" on the AT-47, "DIAGNOSTIC WORKSHEET".
Example of Diagnosis Sheet
2. CHECK SHIFT-DOWN
During manual mode driving, is downshift from M5 -> M4 -> M3 -> M2 -> M1 performed?
With CONSULT-II
Read the gear position. Refer to AT-95, "DATA MONITOR MODE". Data Monitor Mode
Is downshifting correctly performed?
YES >> GO TO 3.
NO >> Enter a check mark at "A/T Does Not Shift" at the corresponding position (5th -> 4th, 4th -> 3rd, 3rd -> 2nd, 2nd -> 1st) on the AT-47, "DIAGNOSTIC WORKSHEET", then continue the road test.
Example of Diagnosis Sheet
3. CHECK ENGINE BRAKE
Check engine brake.
Does engine braking effectively reduce speed in M1 position?
YES >> 1. Stop the vehicle.
2. Perform self-diagnostics. Refer to AT-92, "SELF-DIAGNOSTIC RESULT MODE", AT-102, "Diagnostic Procedure without CONSULT-II".
Self-Diagnostic Result Mode
NO >> Enter a check mark at AT-227, "Vehicle Does Not Decelerate by Engine Brake" on the AT-47, "DIAGNOSTIC WORKSHEET", then continue trouble diagnosis.
Example of Diagnosis Sheet