Introduction

Trouble Diagnosis

HOW TO PERFORM TROUBLE DIAGNOSIS
1. Check the symptom and customer complaint.
2. Understand the outline of system. Refer to "System Description".
3. Perform the preliminary inspection. Refer to DI-95, "Preliminary Inspection". Preliminary Inspection
4. Referring to symptom chart, repair or replace the cause of the malfunction. Refer to DI-95, "SYMPTOM CHART". Symptom Matrix Chart
5. Erase DTC and perform self-diagnosis of LDW system again. Then perform LDW system running test. Refer to DI-92, "CONSULT-II Function (LDW)" CONSULT-II Function (LDW) and DI-80, "LDW SYSTEM RUNNING TEST". Action Test
6. Does LDW system operate normally? If it operates normally, GO TO 7. If not, GO TO 3.
7. INSPECTION END