Active Test

ACTIVE TEST MODE

Operation Procedure
1. Perform "CONSULT-II Start Procedure". Refer to GI-38, "CONSULT-II Start Procedure". Reading and Clearing Diagnostic Trouble Codes





2. Touch "ACTIVE TEST".
3. Select from "SELECT TEST ITEM ", screen of active test mode is displayed.

Test Item
^ Flasher
^ Horn
^ Warning lamp
^ ID regist warning
^ Flat tire warning

Flasher





Touch "LH" and "RH" on the display, and then check to make sure that each turn signal lamp turns on.

Horn





Touch "LH" and "RH" on the display, and then check to make sure that the horn sounds.

Warning Lamp





Touch "LH" and "RH" on the display, and then check to make sure that the warning lamp turns on.

ID Regist Warning





Touch "LH" and "RH" on the display, and then check to make sure that the buzzer sounds or the warning lamp turns on.

Flat Tire Warning





Touch "LH" and "RH" on the display, and then check to make sure that the buzzer sounds or the warning lamp turns on.