Daytime Light System
Terminals And Reference Values For BCM (Part 1):
Terminals And Reference Values For BCM (Part 2):
Terminals And Reference Values For BCM (Part 3):
Terminals and Reference Values for BCM
CAUTION:
- Check combination switch system terminal waveform under the loaded condition with lighting switch, turn signal switch and wiper switch OFF not to be fluctuated by overloaded.
- Turn wiper intermittent dial position to 4 except when checking waveform or voltage of wiper intermittent dial position. Wiper intermittent dial position can be confirmed on CONSULT-II. Refer to LT-117, "DATA MONITOR". Data Monitor