Check Before Engine Is Started

Check Before Engine Is Started

1. CHECK A/T CHECK INDICATOR LAMP
1. Park vehicle on level surface.
2. Move selector lever to "P" position.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON. (Do not start engine.)
Does A/T CHECK indicator lamp light up for about 2 seconds?
YES >> 1. Turn ignition switch OFF.
2. Perform self-diagnostics and record all NG items on the AT-47, "DIAGNOSTIC WORKSHEET". Refer to AT-92, "SELF-DIAGNOSTIC RESULT MODE", AT-102, "Diagnostic Procedure without CONSULT-II".
Example of Diagnosis Sheet
Self-Diagnostic Result Mode
3. Go to AT-57, "Check at Idle". Check at Idle
NO >> Stop the road test and go to AT-189, "A/T CHECK Indicator Lamp Does Not Come On". A/T Check Indicator Lamp Does Not Come On