Cannot Be Changed to Manual Mode
Cannot Be Changed to Manual ModeSYMPTOM: Does not change to manual mode when manual shift gate is used.
DIAGNOSTIC PROCEDURE
1. CHECK MANUAL MODE SWITCH
Check the manual mode switch. Refer to AT-166, "DTC P1815 MANUAL MODE SWITCH. P1815
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.
2. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to AT-92, "SELF-DIAGNOSTIC RESULT MODE", AT-102, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)".
Self-Diagnostic Result Mode
TCM Self-Diagnostic Procedure (No Tools)
Is any malfunction detected by self-diagnostic results?
YES >> Check the malfunctioning system. Refer to AT-92, "SELF-DIAGNOSTIC RESULT MODE", AT-103, "Judgement Self-diagnosis Code".
Self-Diagnostic Result Mode
TCM Self-Diagnostic Procedure (No Tools)
NO >> INSPECTION END