Overhaul

Disassembly and assembly

REGULATOR ASSEMBLY

Disassembly
Remove the power window motor from the regulator assembly.

Assembly
Assemble in the reverse order of disassembly.

Fitting Inspection
- Make sure the glass is securely fit into the glass run groove.
- Lower the glass slightly [approx. 10 to 20 mm (0.39 to 0.79 in)], and make sure the clearance to the sash is parallel. If the clearance between the glass and sash is not parallel, loosen the regulator mounting bolts, guide rail mounting bolts, and glass and carrier plate mounting bolts to correct the glass position.