Introduction

How to Proceed With Trouble Diagnosis
1. Confirm the symptom or customer complaint.
2. Understand operation description and function description. Refer to "System Description".
3. Perform pre-diagnosis inspection. Refer to DI-56, "Pre-diagnosis Inspection". Pre-Diagnosis Inspection
4. Perform self-diagnosis. Refer to DI-56, "Self-diagnosis Function". Self-Diagnosis Function
5. Perform the preliminary check. Refer to DI-58, "Preliminary Check". Preliminary Check
6. Check symptom and repair or replace the cause of malfunction. Refer to DI-59, ,"Symptom Chart". Symptom Matrix Chart
7. Does the rear sonar system operate properly? If so, go to 8. If not, go to 3.
8. Clear fault codes. Refer to DI-57, "IDLING OR CLEARING FAULT CODES MODE". Idling or Clearing Fault Codes Mode
9. Inspection End.