Rod Bearing Cap

Rod Bearing Cap





Tighten connecting rod bolts using Tool.
Tool number: KV10112100 (BT-8653-A)
Connecting rod bolts
Step 1 19.6 Nm (1.5 kg-m, 11 ft-lb)
Step 2 90° clockwise
Apply engine oil to threads and seats of connecting rod bolts.
After tightening bolts, make sure the crankshaft rotates smoothly.
Check connecting rod side clearance.

CONNECTING ROD BOLT DIAMETER
Measure diameter "d" at position shown.





When "d" is out of specifications (when it becomes thinner), replace bolt with a new one.
Limit 7.75 mm (0.3051 in) or less.