Trouble Diagnosis With Battery/Starting/Charging System Tester

Trouble diagnosis with Battery/Starting/Charging System Tester

NOTE: To ensure a complete and thorough diagnosis, the battery, starter and generator test segments must be done as a set from start to finish.




1. Turn off all loads on the vehicle electrical system.
2. Perform battery test with Battery/Starting/Charging system tester. Refer to SC-6, "Trouble diagnosis with Battery/Starting/Charging System Tester". Trouble Diagnosis With Battery/Starting/Charging System Tester
3. Press "ENTER" to begin the starting system test.




4. Start the engine.




5. Diagnosis result is displayed on the tester. Refer to SC-12, "DIAGNOSTIC RESULT ITEM CHART". Diagnostic Result Item Chart

NOTE:
- If the starter performs normally but the engine does not start, perform engine diagnosis.
- For intermittent "NO CRANK" or "NO STARTER OPERATION" incidents, refer to SC-15, "DIAGNOSTIC PROCEDURE 2". Diagnostic Procedure 2