Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti Truck >> 2007 >> QX56 RWD V8-5.6L (VK56DE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Steering and Suspension >> Relays and Modules - Suspension >> Suspension Control Module >> Service and Repair >> Removal and Installation

Removal and Installation

CONTROL UNIT

Removal and Installation
REMOVAL
1. Remove the rear LH interior trim panel.
2. Disconnect the battery negative terminal.





3. Disconnect the suspension control unit electrical connector.
4. Remove the two bolts and remove the suspension control unit.

INSTALLATION
Installation is in the reverse order of removal.
Suspension control unit bolts: 6 Nm (0.6 kg-m, 53 in-lb)

pro multis · About Operation CHARM