ABS Warning Lamp

ABS WARNING LAMP

Description





Component Function Check

1.CHECK ABS WARNING LAMP OPERATION
Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Proceed to diagnosis procedure. Refer to "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK SELF-DIAGNOSIS
Perform ABS actuator and electric unit (control unit) self-diagnosis.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Check items displayed by self-diagnosis.

2.CHECK COMBINATION METER
Check if the indication and operation of combination meter are normal. Refer to MWI-38, "Diagnosis Description". Diagnosis Description
Is the inspection result normal?
YES >> Replace ABS actuator and electric unit (control unit).
NO >> Repair or replace combination meter.