System Inspection

Inspection

LEVEL





^ Check if the reservoir tank engine coolant level is within the "MIN" to "MAX" when the engine is cool.
A: MAX
B: MIN
^ Adjust the engine coolant level as necessary.
^ Check that the reservoir tank cap is tightened.

LEAKAGE





^ To check for leakage, apply pressure to the cooling system with the radiator cap tester and radiator cap tester adapter (commercial service tool) (A).
Testing pressure: Refer to CO-25, "Radiator". Specifications

WARNING:
Never remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from water outlet (front).

CAUTION:
Higher test pressure than specified may cause radiator damage.

NOTE:
In a case that engine coolant decreases, replenish radiator with engine coolant.

^ If anything is found, repair or replace damaged parts.