Personal Lamp

PERSONAL LAMP

Exploded View

INL-107 Exploded View:

NOTE: Replace the personal lamp case as a set (right and left). After removing the headlining assembly, remove the personal lamp case.

Removal and Installation

CAUTION: Disconnect the battery negative terminal or remove the fuse.

REMOVAL
1. Remove the headlining assembly.
2. Insert any appropriate tool into the gap between the lens. Remove the lens.






4. Remove the personal lamp case from the headlining assembly.

NOTE: Replace the personal lamp case as a set (right and left).

INSTALLATION
Install in the reverse order of removal.

NOTE: The following is easier to install the personal lamp finisher.






Replacement

CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.