Dome Lamp: Service and Repair
LUGGAGE ROOM LAMPLUGGAGE SIDE
LUGGAGE SIDE: Exploded View
INL-110 Exploded View:
LUGGAGE SIDE: Removal and Installation
CAUTION: Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1. Insert any appropriate tool into the gap between the luggage room lamp (luggage side) and luggage side finisher upper. And then remove the luggage room lamp (luggage side).
2. Disconnect the luggage room lamp (luggage side) connector.
INSTALLATION
Install in the reverse order of removal.
LUGGAGE SIDE: Replacement
CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.
BACK DOOR SIDE
BACK DOOR SIDE: Exploded View
INL-111 Exploded View:
BACK DOOR SIDE: Removal and Installation
CAUTION: Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1. Insert any appropriate tool into the gap between the luggage room lamp (back door side) assembly and back door finisher inner. Remove the luggage room lamp (back door side) assembly.
2. Disconnect the luggage room lamp (back door side) connector.
INSTALLATION
Install in the reverse order of removal.
BACK DOOR SIDE: Replacement
CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.