ID Registration Cannot Be Completed

ID REGISTRATION CANNOT BE COMPLETED

Description

DESCRIPTION
The ID of the transmitter installed in each wheel cannot be registered in the tire pressure monitoring system. Inspect the transmitter or the tire pressure monitoring system circuit.

Diagnosis Procedure

1. CHECK ID REGISTRATION
1. Perform ID registration of all transmitters. Refer to WT-6, "ID REGISTRATION PROCEDURE: Special Repair Requirement". Transmitter ID Registration Procedure
2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes.
3. Check all tire pressures with CONSULT-III "DATA MONITOR" within 5 minutes.





Is the inspection result normal?
YES >> INSPECTION END
NO >> GO TO 2.

2. CHECK TRANSMITTER
1. Perform trouble diagnosis for transmitters. Refer to WT-18, "Diagnosis Procedure". C1708
2. Perform ID registration of all transmitters. Refer to WT-6, "ID REGISTRATION PROCEDURE: Special Repair Requirement". Transmitter ID Registration Procedure
Can ID registration? of all transmitters be completed?
YES >> INSPECTION END
NO >> Replace the transmitter.