Power Distribution Module: Service and Repair

ON-VEHICLE REPAIR

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Exploded View

PCS-34 Exploded View:

Removal and Installation

CAUTION: IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.

REMOVAL
1. Disconnect the battery cable from the negative terminal.




2. Remove cowl top cover (RH). Refer to "Exploded View".
3. Pull up the IPDM E/R assembly while pressing the pawl (A) on the back of the IPDM E/R cover B (1).




4. Remove the IPDM E/R cover A while pressing the pawl (A) at the lower end of the IPDM E/R cover A (1).
5. Disconnect the harness connector and remove IPDM E/R (2).




6. Remove the bolt (A) and remove the bracket (1) from the vehicle.

INSTALLATION
Install in the reverse order of removal.