Body Control Module: Service and Repair

ON-VEHICLE REPAIR

BCM (BODY CONTROL MODULE)

Exploded View

CAUTION: Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to BCS-3, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description". Programming and Relearning

BCS-84 Exploded View:

Removal and Installation

CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to BCS-3, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description". Programming and Relearning

REMOVAL
1. Remove dash side finisher (passenger side).
2. Remove bolt and nut.
3. Remove BCM and disconnect the connector.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Be sure to perform "WRITE CONFIGURATION" when replacing BCM.
- Be sure to perform the system initialization (NATS) when replacing BCM. Refer to BCS-3, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Special Repair Requirement". Programming and Relearning