Welcome Light Function

WELCOME LIGHT FUNCTION

WELCOME LIGHT FUNCTION : System Description

CONDITION OF SEARCHING
If all following conditions are satisfied, BCM search Intelligent Key by outside key antenna (front outside handle LH/RH and back door). BCM has timer to search for 14 days (every 0.3 sec.). If run the engine, the timer will be reset.






OPERATION PROCEDURE
BCM search outside key antenna (front outside handle LH/RH and back door) detection area. If registered Intelligent Key is detected, BCM turn ON the room lamp and puddle lamp.

SYSTEM SETTING PROCEDURE
Setting of welcome light function can be changed by following procedure. (for system setting by CONSULT-III: refer to DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)". Intelligent Key)
1. Confirm Intelligent Key is removed from key slot.
2. Turn ignition switch ON and press and hold request switch (driver side) more than 5 seconds.
3. Confirm sounds of buzzer (combination meter).

Pi, Pi, Pi....(approx. 1.2 sec.): Welcome light function is OFF.
Pi, Pi, Pi...(approx. 2.4 sec.): Welcome light function is ON.