Grille: Service and Repair

FRONT GRILLE

Exploded View

EXT-20 Exploded View:

Removal and Installation

REMOVAL

CAUTION: Apply protection tape around outer circumference of front grille (bumper fascia side).

1. Fully open hood.





2. Remove front grille (1) fixing clips (A) with remover tool.





3. Remove hood seal assembly (front) (1) fixing clips with remover tool, and then remove hood seal assembly (front).





4. Pull front grille (1) horizontally toward vehicle front, and then remove front grille.





5. Remove front camera harness clips (A).
6. Disconnect front camera harness connector (B). (with FRONT CAMERA)
7. Remove the following parts after removing front grille.
- Front camera.
- Front emblem

INSTALLATION
Install in the reverse order of removal.

CAUTION: Perform camera image calibration. Refer to AV-438, "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement". Calibrating Camera Image (Around View Monitor)