Engine Control Module

TERMINAL LAYOUT






PHYSICAL VALUES

NOTE:
- ECM is located behind the instrument assist lower panel. For this inspection, remove passenger side instrument lower panel.
- Specification data are reference values and are measured between each terminal and ground.
- Pulse signal is measured by CONSULT-III.

Terminals And Reference Values (Part 1):

Terminals And Reference Values (Part 2):

Terminals And Reference Values (Part 3):

Terminals And Reference Values (Part 4):

Terminals And Reference Values (Part 5):

Terminals And Reference Values (Part 6):

Terminals And Reference Values (Part 7):

Terminals And Reference Values (Part 8):

Terminals And Reference Values (Part 9):

Terminals And Reference Values (Part 10):

Terminals And Reference Values (Part 11):

Terminals And Reference Values (Part 12):