Drive Belt: Testing and Inspection

Checking

WARNING:
Be sure to perform the this step when engine is stopped.

^ Check that the indicator (C) (notch on fixed side) of drive belt auto-tensioner is within the possible use range (A).

NOTE:
^ Check the drive belt auto-tensioner indication when the engine is cold.
^ When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B), in the figure.

^ Visually check entire drive belt for wear, damage or cracks.
^ If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.