Battery Cable: Service and Repair
BATTERY TERMINAL WITH FUSIBLE LINKExploded View
PG-105 Exploded View:
Removal and Installation
REMOVAL
1. Remove battery cover.
2. Disconnect the battery cable from the negative terminal.
3. Remove cover of battery positive terminal.
4. Remove harness mounting nuts (1) and fusible link holder mounting nut (2).
5. Disconnect harness connector (3) and remove battery terminal with fusible link (4).
INSTALLATION
Install in the reverse order of removal.
Harness mounting nut torque: 13.2 N.m (1.3 kg-m, 10 ft-lb)
Fusible link holder mounting nut torque: 13.2 N.m (1.3 kg-m, 10 ft-lb)