Removal and Replacement
ON-VEHICLE REPAIRBATTERY
Exploded View
PG-103 Exploded View:
Removal and Installation
REMOVAL
1. Remove battery cover.
2. Remove the clips (A) and remove hoodledge cover RH (1).
3. Remove the cowl top cover (RH).
4. Loosen battery terminal nuts (1), and disconnect both battery cables from battery terminals.
CAUTION: When disconnecting, disconnect the battery cable from the negative terminal first.
5. Remove battery fix frame mounting nuts (2) and battery fix frame (3).
6. Remove battery.
INSTALLATION
Install in the reverse order of removal.
CAUTION: When connecting, connect the battery cable to the positive terminal first.
Battery fix frame mounting nut torque: 3.9 N.m (0.40 kg-m, 35 in-lb)
Battery terminal nut torque: 5.4 N.m (0.55 kg-m, 48 in-lb)
Reset electronic Systems as necessary. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL: Required Procedure After Battery Disconnection".